| PUMP | ||
| Liquid handle | Type of liquid | Clean water |
| Max temperature[°C] | 90°C (MD); 130°C (MMD) | |
| Flanges | UNI 2236 – UNI 2223-29 PN 10 | |
| Counter flanges (on request) | UNI 2247 | |
| Construction | Impeller | Closed centrifugal type |
| Shaft seal type | Mechanical seal | |
| Bearing | Sealed ball bearing | |
| Pipe connection | Suction | Flange to DIN 2532 (50mm-65mm-80mm) |
| Discharge | Flange to DIN 2532 (32mm-40mm-50mm-65mm | |
| Material | Casing | Cast iron |
| Impeller | Cast iron – Bronze | |
| Casing cover | Cast iron | |
| Shaft seal | Ceramic SiC/SiC/EPDM (MMD) | |
| Shaft | AISI 304 (Part in contact with liquid/AISI 406 per MMD) | |
| Bracket | Cast iron | |
| Applicable standard of test | ISO 9906 Annex A | |
MD/MMD 2 pole: 2900 min-1
| Model | Motor | Q=Capacity | |||||||||||||||||||||
| l/min 0 | 100 | 200 | 250 | 280 | 320 | 400 | 550 | 600 | 667 | 800 | 1000 | 1100 | 1150 | 1200 | 1400 | 1900 | 2000 | 2200 | 2300 | 2400 | |||
| kW | HP | m3/h 0 | 6 | 12 | 15 | 17 | 19 | 24 | 33 | 36 | 40 | 48 | 60 | 66 | 69 | 72 | 84 | 114 | 120 | 132 | 138 | 144 | |
| H=Total head [m] | |||||||||||||||||||||||
| MD 32-125/1.1* | 1.1 | 1.5 | 23 | 22.5 | 20.5 | 18.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| MD 32-125/1.5* | 1.5 | 2 | 24 | 23.5 | 21.5 | 19.7 | 18.5 | 16.6 | 12 | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| MD 32-160/1.5* | 1.5 | 2 | 28 | 27 | 24 | 22 | 20.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| MD 32-160/2.2* | 2.2 | 3 | 35.5 | 34.5 | 32 | 30 | 28.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| MD 32-200/3.0 | 3 | 4 | 43 | 41 | 36.5 | 33 | 30.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| MD 32-200/4.0 | 4 | 5.5 | 52 | 50.5 | 47 | 44.5 | 42.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| MD 32-250/5.5 | 5.5 | 7.5 | 58 | 57 | 54 | 51 | 49 | 45 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| MD 32-250/7.5 | 7.5 | 10 | 71 | 70 | 67 | 64 | 62 | 58 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| MD 32-250/9.2 | 9.2 | 12.5 | 84 | 83 | 80 | 78 | 76 | 73 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| MD 32-250/11 | 11 | 15 | 95 | 94 | 91 | 89 | 87 | 84 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| MD 40-125/1.5* | 1.5 | 2 | 20 | 19.5 | 18.4 | 17.7 | 17.2 | 16.5 | 14.6 | 10.3 | 8.5 | – | – | – | – | – | – | – | – | – | – | – | – |
| MD 40-125/2.2* | 2.2 | 3 | 25.5 | 25 | 23.5 | 23 | 22.5 | 22 | 20.5 | 16.9 | 15.5 | – | – | – | – | – | – | – | – | – | – | – | – |
| MD 40-160/3.0 | 3 | 4 | 31.5 | 30.5 | 29 | 28 | 27.5 | 26.5 | 25 | 21 | 19 | – | – | – | – | – | – | – | – | – | – | – | – |
| MD 40-160/4.0 | 4 | 5.5 | 39 | 38 | 36.5 | 36 | 33.5 | 35 | 33 | 29.5 | 28 | – | – | – | – | – | – | – | – | – | – | – | – |
| MD 40-200/5.5 | 5.5 | 7.5 | 48.5 | 48 | 47 | 46 | 45.5 | 44.5 | 42.5 | 37.5 | – | – | – | – | – | – | – | – | – | – | – | – | – |
| MD 40-200/7.5 | 7.5 | 10 | 58 | 57.5 | 56.5 | 55.5 | 55 | 54.5 | 52.5 | 47.5 | 45 | – | – | – | – | – | – | – | – | – | – | – | – |
| MD 40-250/11 | 11 | 15 | 74.5 | – | 73 | 72 | 71.5 | 70 | 66.5 | 58.5 | 55 | – | – | – | – | – | – | – | – | – | – | – | – |
| MD 40-250/13 | 13 | 17.5 | 85.5 | – | 84 | 83.5 | 82.5 | 81.5 | 78 | 69 | 65 | – | – | – | – | – | – | – | – | – | – | – | – |
| MD 40-250/15 | 15 | 20 | 94.5 | – | 93 | 92 | 91.5 | 90.5 | 88 | 78 | 74 | – | – | – | – | – | – | – | – | – | – | – | – |
| MD 50-125/2.2* | 2.2 | 3 | 17.5 | – | – | – | – | – | 16 | 14.8 | 14.3 | 13.5 | 11.7 | 8.5 | – | – | – | – | – | – | – | – | – |
| MD 50-125/3.0 | 3 | 4 | 21 | – | – | – | – | – | 19.5 | 18.6 | 18.2 | 17.6 | 16.1 | 13 | – | – | – | – | – | – | – | – | – |
| MD 50-125/4.0 | 4 | 5.5 | 25.5 | – | – | – | – | – | 24 | 23 | 23 | 22 | 21 | 17.8 | 16 | – | – | – | – | – | – | – | – |
| MD 50-160/5.5 | 5.5 | 7.5 | 33.5 | – | – | – | – | – | 32.5 | 31 | 30.5 | 30 | 28 | 24.5 | 22.5 | – | – | – | – | – | – | – | – |
| MD 50-160/7.5 | 7.5 | 10 | 39 | – | – | – | – | – | 38 | 37 | 36.5 | 35.5 | 34 | 31 | 29 | 28 | 27 | – | – | – | – | – | – |
| MD 50-200/9.2 | 9.2 | 12.5 | 50 | – | – | – | – | – | 48 | 46 | 45 | 44 | 41 | 36 | 33 | – | – | – | – | – | – | – | – |
| MD 50-200/11 | 11 | 15 | 56 | – | – | – | – | – | 54.5 | 53 | 52 | 51 | 48.5 | 43.5 | 40.5 | 39 | 37 | – | – | – | – | – | – |
| MD 50-250/15 | 15 | 20 | 71 | – | – | – | – | – | 69 | 67 | 66 | 64 | 60.5 | 52.5 | 47 | – | – | – | – | – | – | – | – |
| MD 50-250/18.5 | 18.5 | 25 | 82 | – | – | – | – | – | 80 | 78.5 | 77.5 | 76 | 72.5 | 65 | 60 | 57 | – | – | – | – | – | – | – |
| MD 50-250/22 | 22 | 30 | 93 | – | – | – | – | – | 91 | 89.5 | 88.5 | 87 | 84 | 77 | 72.5 | 70 | – | – | – | – | – | – | – |
| MD 65-125/5.5 | 5.5 | 7.5 | 24 | – | – | – | – | – | – | – | 23.2 | 23 | 21.5 | 22.5 | 21.5 | 20.5 | 20 | 18.2 | 12.5 | – | – | – | – |
| MD 65-125/7.5 | 7.5 | 10 | 27.5 | – | – | – | – | – | – | – | 26.5 | 26 | 25.5 | 24.5 | 24 | 23.5 | 23 | 21.5 | 16.3 | 15 | – | – | – |
| MD 65-160/11 | 11 | 15 | 34.5 | – | – | – | – | – | – | – | – | 34 | 33.5 | 33 | 32.5 | 32 | 32 | 30.5 | 26.5 | 25.5 | 23 | 22 | – |
| MD 65-160/15 | 15 | 20 | 39 | – | – | – | – | – | – | – | – | – | 38 | 37.5 | 37 | 36.5 | 35 | 31 | 30.5 | 28.5 | 28.5 | 27 | 26 |
| MD 65-200/18.5 | 18.5 | 25 | 55 | – | – | – | – | – | – | – | – | – | 53.5 | 52.5 | 51.5 | 51 | 50.5 | 48.5 | 42 | 40.5 | 37 | – | – |
| MD 65-200/22 | 22 | 30 | 61 | – | – | – | – | – | – | – | – | – | 59.5 | 58.5 | 58 | 57.5 | 57 | 55.5 | 50 | 49 | 46 | – | – |
| Model | Motor | Q=Capacity | |||||||||||||||
| l/min 0 | 800 | 1000 | 1250 | 1500 | 1750 | 2000 | 2250 | 2500 | 2750 | 3000 | 3500 | 4000 | 4500 | ||||
| kW | HP | m3/h 0 | 48 | 60 | 75 | 90 | 105 | 120 | 135 | 150 | 165 | 180 | 210 | 240 | 270 | ||
| H=Totalheamd [m⌋ | |||||||||||||||||
| MMD 65-250/22 | 22 | 30 | 65 | 64 | 63 | 61 | 57 | 53 | – | – | – | – | – | – | – | – | – |
| MMD 65-250/30 | 30 | 40 | 78 | 77 | 76 | 74 | 70 | 66 | 60 | 53* | – | – | – | – | – | – | – |
| MMD 65-250/37 | 37 | 55 | 86.5 | 86 | 85 | 83 | 79 | 75 | 70 | 64* | – | – | – | – | – | – | – |
| MMD 80-160/10 | 10 | 13.6 | 24.8 | – | 24 | 23 | 22 | 21 | 19.5 | 18 | 16.5 | 15* | – | – | – | – | – |
| MMD 80-160/12.5 | 12.5 | 17 | 29.5 | – | 28.5 | 28 | 27 | 26 | 24.5 | 23 | 21.5 | 20 | 18.5* | – | – | – | – |
| MMD 80-160/15 | 15 | 20 | 35 | – | 34 | 33.3 | 32.5 | 31.8 | 31 | 29 | 27.5 | 26 | 24.3 | – | – | – | – |
| MMD 80-200/18.5 | 18.5 | 25 | 42.2 | – | 42 | 41 | 40 | 38.5 | 37 | 35 | 33 | 30.5 | 28 | – | – | – | – |
| MMD 80-200/22 | 22 | 30 | 47.2 | – | 47 | 46.5 | 45.5 | 44.5 | 43 | 41 | 39 | 37 | 34 | – | – | – | – |
| MMD 80-200/30 | 30 | 40 | 55.5 | – | 55 | 54 | 53 | 52 | 51 | 49 | 47 | 45 | 43 | 37 | – | – | – |
| MMD 80-200/37 | 37 | 55 | 57.5 | – | 57 | 56.8 | 56.5 | 56 | 55 | 54 | 52.5 | 51 | 48 | 42 | – | – | – |
| MMD 80-250/37 | 37 | 55 | 68.5 | – | – | 67.5 | 67 | 66.2 | 65 | 63.3 | 61 | 58.3 | 55 | 47 | – | – | – |
| MMD 100-200/22 | 22 | 30 | 40 | – | – | – | 38.5 | 38 | 37 | 36 | 34.5 | 33 | 31.5 | 28 | 24 | – | – |
| MMD 100-200/30 | 30 | 40 | 48 | – | – | – | 47 | 46.3 | 45.6 | 44.8 | 43.7 | 42.4 | 41 | 38 | 34.6* | 30** | – |
| MMD100-200/37 | 37 | 55 | 54.2 | – | – | – | 53.7 | 53.3 | 53 | 52 | 51 | 50 | 49 | 46 | 43* | 38** | – |
MMD 4 pole: 1450 min-1
| Model | Motor | Q=Capacity | |||||||||||||||||||||||||||||||
| l/min 0 | 50 | 75 | 100 | 125 | 150 | 175 | 200 | 225 | 250 | 275 | 300 | 350 | 400 | 450 | 500 | 550 | 600 | 650 | 700 | 800 | 900 | 1000 | 1100 | 1200 | 1300 | 1400 | 1500 | 1750 | 2000 | 2250 | |||
| kW | HP | m3/h 0 | 3 | 4.5 | 6 | 7.5 | 9 | 10.5 | 12 | 13.5 | 15 | 16.5 | 18 | 21 | 24 | 27 | 30 | 33 | 36 | 39 | 42 | 48 | 54 | 60 | 66 | 72 | 78 | 84 | 90 | 105 | 120 | 135 | |
| H=Total head [m] | |||||||||||||||||||||||||||||||||
| MMD4 32-125/0.25 R | 0.25 | 0.33 | 4.8 | 4.4 | 4 | 3.5 | 3 | 2.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| MMD4 32-125/0.25 | 0.25 | 0.33 | 6.3 | 6.2 | 6.1 | 5.8 | 5.3 | 4.6 | 3.8 | 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| MMD4 32-160/0.37 | 0.37 | 0.5 | 9.6 | – | 9.2 | 8.9 | 8.3 | 7.7 | 6.8 | 5.8 | 4.7 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| MMD4 32-200/0.75 | 0.75 | 1.0 | 13.5 | – | 12.8 | 12.4 | 11.9 | 11.3 | 10.6 | 9.8 | 8.9 | 8 | 7 | 6 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| MMD4 32-200/0.92 | 0.92 | 1.25 | 15 | – | 14.6 | 14.3 | 13.8 | 13.3 | 12.7 | 11.8 | 10.9 | 10 | 9 | 8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| MMD4 32-250/1.1 | 1.1 | 1.5 | 19 | – | 18.5 | 18 | 17.5 | 17 | 15.9 | 14.5 | 12.8 | 11 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| MMD4 32-125/1.5 | 1.5 | 2 | 22.5 | – | 22 | 21.6 | 21.2 | 20.5 | 19.4 | 18 | 16.5 | 15 | 13* | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| MMD4 40-125/0.25 | 0.25 | 0.33 | 4.8 | – | – | 4.6 | 4.5 | 4.3 | 4.1 | 3.9 | 3.6 | 3.3 | 2.9 | 2.4 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| MMD4 40-125/0.37 | 0.37 | 0.5 | 6.4 | – | – | 6.3 | 6.2 | 6.1 | 6 | 5.8 | 5.5 | 5.2 | 4.9 | 4.4 | 3* | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| MMD4 40-160/0.55 | 0.55 | 0.75 | 9.2 | – | – | 8.8 | 8.6 | 8.4 | 8.1 | 7.7 | 7.3 | 6.9 | 6.4 | 5.9 | 4.4 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| MMD4 40-200/1.1R | 1.1 | 1.5 | 12.9 | – | – | 12.7 | 12.5 | 12.1 | 11.7 | 11.2 | 10.7 | 10.1 | 9.5 | 8.5 | 6.8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| MMD4 40-200/1.1 | 1.1 | 1.5 | 14.5 | – | – | 14.2 | 14 | 13.8 | 13.4 | 13 | 12.5 | 11.8 | 11 | 10.2 | 8.3 | 6 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| MMD4 40-250/1.5 | 1.5 | 2 | 18.7 | – | – | 18.3 | 18 | 17.7 | 17.4 | 17 | 16.7 | 16.2 | 15.6 | 15 | 13.7 | 12 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| MMD4 40-250/2.2 | 2.2 | 3 | 23.2 | – | – | 22.5 | 22.3 | 22 | 21.7 | 21.4 | 21.2 | 20.5 | 20.2 | 19.5 | 18.5 | 17 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| MMD4 50-125/0.37 | 0.37 | 0.5 | 5.4 | – | – | – | – | 5.3 | 5.3 | 5.2 | 5.1 | 5 | 4.9 | 4.8 | 4.5 | 4.1 | 3.6 | 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| MMD4 50-125/0.55 | 0.55 | 0.75 | 6.5 | – | – | – | – | 6.4 | 6.3 | 6.3 | 6.2 | 6.1 | 6 | 5.9 | 5.5 | 5.2 | 4.9 | 4.4 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| MMD4 50-160/0.75 | 0.75 | 1.0 | 8.3 | – | – | – | – | – | – | 8.1 | 8 | 7.9 | 7.8 | 7.7 | 7.4 | 7 | 6.6 | 6 | 5.1 | 4 | – | – | – | – | – | – | – | – | – | – | – | – | – |
| MMD4 50-160/0.92 | 0.92 | 1.25 | 9.1 | – | – | – | – | – | – | 9 | 8.9 | 8.9 | 8.8 | 8.7 | 8.4 | 8.1 | 7.7 | 7.2 | 6.4 | 5.5 | – | – | – | – | – | – | – | – | – | – | – | – | – |
| MMD4 50-200/1.1 | 1.1 | 1.5 | 12.6 | – | – | – | – | – | – | 12.3 | 12.2 | 12 | 11.8 | 11.5 | 10.8 | 10 | 9 | 8 | 7 | 5.8 | – | – | – | – | – | – | – | – | – | – | – | – | – |
| MMD4 50-200/1.5 | 1.5 | 2 | 14.3 | – | – | – | – | – | – | 14.1 | 14 | 13.9 | 13.7 | 13.5 | 12.8 | 12 | 11.3 | 10.2 | 9 | 7.8 | 6.4 | – | – | – | – | – | – | – | – | – | – | – | – |
| MMD4 50-250/2.2 | 2.2 | 3 | 19.5 | – | – | – | – | – | – | 18.5 | 18.3 | 18.1 | 17.8 | 17.5 | 17 | 16.2 | 15.5 | 14.5 | 13.5 | 12.5 | 11.3 | 10 | – | – | – | – | – | – | – | – | – | – | – |
| MMD4 50-250/3 | 3 | 4 | 23 | – | – | – | – | – | – | 22.5 | 22.4 | 22.3 | 22.2 | 22 | 21.5 | 20.9 | 20.2 | 19.4 | 18.5 | 17.5 | 16.3 | 14.7 | – | – | – | – | – | – | – | – | – | – | – |
| MMD4 65-125/0.75 | 0.75 | 1.0 | 6 | – | – | – | – | – | – | – | – | – | – | 5.8 | 5.7 | 5.6 | 5.5 | 5.3 | 5.1 | 4.9 | 4.6 | 4.4 | 3.9 | – | – | – | – | – | – | – | – | – | – |
| MMD4 65-160/1.1 | 1.1 | 1.5 | 8.6 | – | – | – | – | – | – | – | – | – | – | 8.5 | 8.5 | 8.4 | 8.3 | 8.2 | 8.1 | 8 | 7.8 | 7.4 | 6.8 | 5.8 | 5 | – | – | – | – | – | – | – | – |
| MMD4 65-160/1.5 | 1.5 | 2 | 10.3 | – | – | – | – | – | – | – | – | – | – | 10.2 | 10.1 | 10 | 9.9 | 9.8 | 9.6 | 9.4 | 9.2 | 9 | 8.4 | 7.5 | 6.5 | – | – | – | – | – | – | – | – |
| MMD4 65-200/2.2 | 2.2 | 3 | 12.6 | – | – | – | – | – | – | – | – | – | – | – | – | 12.5 | 12.4 | 12.3 | 12.2 | 12.1 | 12 | 11.7 | 11.1 | 10.5 | 9.6 | 8.5 | – | – | – | – | – | – | – |
| MMD4 65-200/3 | 3 | 4 | 15.4 | – | – | – | – | – | – | – | – | – | – | – | – | 15.3 | 15.3 | 15.2 | 15.1 | 15 | 14.8 | 14.6 | 14.3 | 13.6 | 12.8 | 12 | 11 | – | – | – | – | – | – |
| MMD4 65-250/4 | 4 | 5.5 | 20 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 19.5 | 19.3 | 19.1 | 18.8 | 18.5 | 17.5 | 16.5 | 15.5 | 14 | 12.5 | 10.4 | – | – | – | – | – |
| MMD4 65-250/5.5 | 5.5 | 7.5 | 23.3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 23 | 22.8 | 22.6 | 22.4 | 22.2 | 21.4 | 20.6 | 19.7 | 18.7 | 17.3 | 15.7 | 14 | – | – | – | – |
| MMD4 80-160/1.5 | 1.5 | 2 | 8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 7.7 | 7.6 | 7.5 | 7.3 | 7 | 6.7 | 6.4 | 6.1 | 5.7 | 5.4 | 5 | – | – | – |
| MMD4 80-160/2.2 | 2.2 | 3 | 10 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 9.7 | 9.6 | 9.5 | 9.3 | 9 | 8.8 | 8.5 | 8.2 | 7.9 | 7.5 | 7.1 | 6 | – | – |
| MMD4 80-200/3 | 3 | 4 | 12.8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 12 | 11.9 | 11.7 | 11.5 | 11.3 | 11 | 10.5 | 10 | 9.5 | 9 | 8.5 | 7 | – | – |
| MMD4 80-200/4 | 4 | 5.5 | 14.9 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 14.4 | 14.3 | 14.2 | 14 | 13.8 | 13.5 | 13.1 | 12.6 | 12.2 | 11.6 | 11 | 9 | 6.5 | – |
| MMD4 80-250/5.5 | 5.5 | 7.5 | 20 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 19.2 | 18.9 | 18.5 | 18 | 17.6 | 17.1 | 16.5 | 16 | 14 | 12 | – |
| MMD4 80-250/7.5 | 7.5 | 10 | 23.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 22.3 | 22.1 | 21.9 | 21.7 | 21.3 | 21 | 20.5 | 20 | 18.5 | 16.9 | 14.5 |
| Model | Motor | Q=Capacity | ||||||||||||||||||||||||||||
| l/min 0 | 900 | 1000 | 1100 | 1200 | 1300 | 1400 | 1500 | 1750 | 2000 | 2250 | ### | 2750 | 3000 | 3500 | 3700 | 4000 | ### | 5000 | 5500 | 6500 | 7000 | 8000 | 8500 | 9000 | 9500 | 10000 | ||||
| kW | HP | m3/h 0 | 54 | 60 | 66 | 72 | 78 | 84 | 90 | 105 | 120 | 135 | 150 | 165 | 180 | 210 | 222 | 240 | 270 | 300 | 330 | 390 | 420 | 480 | 510 | 540 | 570 | 600 | ||
| H=Total head [m] | ||||||||||||||||||||||||||||||
| MMD4 100-200/4 | 4 | 5.5 | 13 | 12.3 | 12.2 | 12 | 11.8 | 11.6 | 11.4 | 11.2 | 10.3 | 9.3 | 8 | 6.6 | 4.8* | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MMD4 100-200/5.5 | 5.5 | 7.5 | 14.7 | 14.5 | 14.4 | 14.2 | 14 | 13.8 | 13.6 | 13.4 | 12.8 | 12 | 11 | 9.8 | 8.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MMD4 100-250/7.5 | 7.5 | 10 | 20 | – | 19.5 | 19.3 | 19.1 | 18.9 | 18.7 | 18.5 | 17.5 | 16.5 | 15.2 | 14 | 12 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MMD4 100-250/9.2 | 9.2 | 12.5 | 22.4 | – | 22 | 21.9 | 21.8 | 21.7 | 21.6 | 21.5 | 20.5 | 19.5 | 18.5 | 17 | 15 | 12.8* | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MMD4 125-200/5.5 | 5.5 | 5.5 | 11.2 | – | – | – | – | – | – | 10.5 | 10.3 | 9.9 | 9.5 | 9.1 | 8.5 | 7.9 | 6.4 | 5.7 | – | – | – | – | – | – | – | – | – | – | – | |
| MMD4 125-200/7.5R | 7.5 | 10 | 12.4 | – | – | – | – | – | – | 11.8 | 11.6 | 11.3 | 11 | 10.6 | 10.2 | 9.6 | 8.3 | 7.7 | 6.7 | – | – | – | – | – | – | – | – | – | – | |
| MMD4 125-200/7.5 | 7.5 | 10 | 13.7 | – | – | – | – | – | – | – | 12.9 | 12.7 | 12.4 | 12.1 | 11.7 | 11.2 | 10.1 | 9.6 | 8.7 | 7.1* | – | – | – | – | – | – | – | – | ||
| MMD4 125-200/9.2 | 9.2 | 12.5 | 15 | – | – | – | – | – | – | – | 14.3 | 14.1 | 13.8 | 13.6 | 13.2 | 12.8 | 11.8 | 11.3 | 10.6 | 9.2 | 7.6** | – | – | – | – | – | – | – | – | |
| MMD4 125-250/11 | 11 | 15 | 18.6 | – | – | – | – | – | – | – | 17.2 | 16.7 | 16.2 | 15.5 | 14.8 | 13.9 | 12 | 11.3 | 10 | – | – | – | – | – | – | – | – | – | – | |
| MMD4 125-250/15 | 15 | 20 | 22 | – | – | – | – | – | – | – | 21 | 20.5 | 20.1 | 19.5 | 18.9 | 18.2 | 16.6 | 16 | 14.8 | 12.8 | – | – | – | – | – | – | – | – | – | |
| MMD4 150-200/7.5 | 7.5 | 10 | 11.6 | – | – | – | – | – | – | – | – | 11 | 10.7 | 10.4 | 10.1 | 9.7 | 8.8 | 8.4 | 7.8 | 6.6 | 5.3 | – | – | – | – | – | – | – | – | |
| MMD4 150-200/9.2 | 9.2 | 12.5 | 12.5 | – | – | – | – | – | – | – | – | 12 | 11.8 | 11.6 | 11.2 | 10.9 | 10.2 | 9.8 | 9.2 | 8 | 6.8 | 5.6 | – | – | – | – | – | – | – | |
| MMD4 150-200/11 | 11 | 15 | 14.5 | – | – | – | – | – | – | – | – | – | – | 13.7 | 13.5 | 13.2 | 12.5 | 12.2 | 11.7 | 10.8 | 9.8 | 8.7 | 6.1 | – | – | – | – | – | – | |
| MMD4 150-200/15 | 15 | 20 | 15.8 | – | – | – | – | – | – | – | – | – | – | 15.2 | 14.9 | 14.7 | 14.2 | 13.8 | 13.4 | 12.5 | 11.6 | 10.5 | 8.2 | 6.8 | – | – | – | – | – | |
| MMD4 200-250/18.5R | 18.5 | 25 | 16 | – | – | – | – | – | – | – | – | – | – | – | – | 14.9 | 14.5 | 14.3 | 14.1 | 13.6 | 13 | 12.3 | 11 | 10.3 | 8.6 | 7.8 | – | – | – | |
| MMD4 200-250/18.5 | 18.5 | 25 | 16.9 | – | – | – | – | – | – | – | – | – | – | – | – | 15.9 | 15.5 | 15.3 | 15.2 | 14.7 | 14.2 | 13.6 | 12.3 | 11.6 | 10 | 9.1 | 8.2 | – | – | |
| MMD4 200-250/22R | 22 | 30 | 19.3 | – | – | – | – | – | – | – | – | – | – | – | – | – | 18 | 17.8 | 17.6 | 17.1 | 16.6 | 16 | 14.7 | 13.9 | 12.2 | 11.2 | 10.1 | 9 | – | |
| MMD4 200-250/22 | 22 | 30 | 20.4 | – | – | – | – | – | – | – | – | – | – | – | – | – | 19.1 | 18.9 | 18.8 | 18.3 | 17.8 | 17.3 | 16 | 15.3 | 13.7 | 12.7 | 11.7 | 10.7 | 9.6 | |
