BƠM CHÌM GIẾNG KHOAN MSUH

BƠM CHÌM GIẾNG KHOAN MSUH

1. Applications
   • Pumping of groundwater
   • Industrial water
   • Melting of snow
   • Agricultural irrigation
   • Water sprinkling
   • Pig farming and other livestock breeding
   • Air conditioning
   • Simple waterworks
2. Standard Specifications
   

   Applicable well diameter (mm)			100 (4B) or more	150 (6B) or more
   Applicable type			25MSUH4 32MSUH4 40MSUH4	50MSUH6 65MSUH6 80MSUH6
   Liquid handled	Liquid quality		For simple hot spring or warm water ※1
   	Allowable liquid temperature		75°C (Minimum flow rate through the motor velocity 4.5m/min)	90°C (Minimum flow rate through the motor velocity 9m/min)
   	pH		5.8 – 8.6	5.8 – 8.6
   	Amount of Chloride		200mg/L or less	200mg/L or less
   	Amount of sand		50mg/L (size 0.1 – 0.25mm) or less	50mg/L (size 0.1 – 0.25mm) or less
   Maximum allowable submergence depth of pump (m)			210m	350m
   Minimum required submergence depth of pump (m)			0.5m	1.0m
   Minimum well inner diameter (mm)			100	146 (VP acceptable)
   Maximum pump outer diameter (mm)			97	142
   Pump	Range	Bore (mm)	25 – 50	50 – 80
   		Output (kW)	0.6 – 3.7	3.7 – 15
   	Structure	Type	Sectional type casing common fastening	Sectional type casing common fastening (bore 50, 65)
   				Multi-stage bowl type common fastening (bore 80)
   		Impeller	Closed impeller	Closed impeller
   	Material	Casing	SUS304	SCS13
   		Impeller	SUS304	SCS13
   		Shaft	SUS304	SUS403
   		Well lid	FC200	FC200
   Submersible motor	Type		Canned type	Canned type
   	Poles/Phase/voltage		2-pole, 3-phase, 200V	2-pole, 3-phase, 200V
   	Starting method		Direct-on-Line start	7.5kW or less: Direct-on-Line start 11kW or more: Star-delta start
   	Insulation class		Class B	Class F
   	Material	Frame	SUS301	SUS304
   		Bracket	Cast iron	Cast iron
   		Shaft	2.2kW or less: SUS630, 3.7kW: SUS630	SUS603
   		Lead wire	EP rubber insulated neoprene cable	2PHCTF
   Piping connection	Pump body		Screw-in type	Flange type
   	Discharge bent pipe (aboveground side)		Flange type	Flange type

3. Standard Specification
   

   Bore mm	Model	Output KW	Discharge rate m3/min	Total head m
   25	25MSUH4-5.6-11※	0.6	0.015	59.5
   	25MSUH4-5.75-13※	0.75	0.015	69.0
   	25MSUH4-51.1-19※	1.1	0.015	102.3
   	25MSUH4-51.5-26	1.5	0.015	143.5
   	25MSUH4-52.2-38	2.2	0.015	187.8
   	25MSUH4-52.2-44	2.2	0.015	202.5
   32	32MSUH4-5.75-10※	0.75	0.03	52.2
   	32MSUH4-51.1-15※	1.1	0.03	76.0
   	32MSUH4-51.5-20	1.5	0.03	103.9
   	32MSUH4-52.2-30	2.2	0.03	153.4
   	32MSUH4-53.7-36	3.7	0.03	184.0
   	32MSUH4-53.7-50	3.7	0.03	255.6
   40	40MSUH4-5.75-5※	0.75	0.06	26.0
   	40MSUH4-51.1-7※	1.1	0.06	36.6
   	40MSUH4-51.5-10	1.5	0.06	51.6
   	40MSUH4-52.2-14	2.2	0.06	70.2
   	40MSUH4-53.7-18	3.7	0.06	94.9
   	40MSUH4-53.7-23	3.7	0.06	117.3
   50	50MSUH4-5.75-3※	0.75	0.12	12.3
   	50MSUH4-51.1-5※	1.1	0.12	20.5
   	50MSUH4-51.5-7	1.5	0.12	28.7
   	50MSUH4-52.2-10	2.2	0.12	38.3
   	50MSUH4-53.7-13	3.7	0.12	51.9
   	50MSUH4-53.7-17	3.7	0.12	65.5

   Đối với loại được đánh dấu bằng ※, công suất động cơ là 1,5kW.

4. Model các sản phẩm: 

   

   Bore mm	Model	Out put KW	Dischargerate m3/min	Total head m	Dischargerate m3/min	Total head m	Discharge rate m3/min	Total head m
   50	50MSUH6-53.7-9	3.7	0.11	77	0.20	65	0.30	36
   	50MSUH6-55.5-13	5.5	0.11	115	0.20	95	0.30	50
   	50MSUH6-57.5-16	7.5	0.11	145	0.20	117	0.30	64
   	50MSUH6-57.5-19	7.5	0.11	170	0.20	140	0.30	65
   	50MSUH6-511-24	11	0.11	210	0.20	170	0.30	85
   65	65MSUH6-53.7-6	3.7	0.20	56	0.35	42	0.50	20
   	65MSUH6-55.5-9	5.5	0.20	84	0.35	64.5	0.50	30
   	65MSUH6-57.5-12	7.5	0.20	112	0.35	86	0.50	40
   	65MSUH6-511-15	11	0.20	140	0.35	105	0.50	50
   	65MSUH6-511-18	11	0.20	168	0.35	126	0.50	60
   	65MSUH6-515-21	15	0.20	196	0.35	147	0.50	70
   	65MSUH6-515-25	15	0.20	233	0.35	179	0.50	83
   80	80MSUH6-53.7-4	3.7	0.40	31	0.55	25.5	0.70	16
   	80MSUH6-55.5-6	5.5	0.40	47	0.55	38	0.70	24.5
   	80MSUH6-57.5-8	7.5	0.40	62.5	0.55	51	0.70	33
   	80MSUH6-511-11	11	0.40	90.5	0.55	76	0.70	51
   	80MSUH6-515-15	15	0.40	124	0.55	103.5	0.70	70

   

#maybomtoancau

#teral