BƠM LY TÂM TRỤC ĐỨNG SLP2
- Applications
- Circulation of cold/warm water, hot-water supply, various settings
- General water supply, and other uses
- Standard specifications
Pumping liquid Liquid quality Fresh water Liquid temperature 0～80°C *1 Total suction head(In case of 20°C) -6m, For use with the total head 10m or less, take 60% or less of the total head. Allowable push-in pressure See the Specification table. Structure
Impeller Closed Shaft seal Mechanical seal Bearing Sealed ball bearing Material
Impeller SUS304 or SCS13 *2 Motor shaft SUS304 equivalent + S35C Casing SCS13 Motor
Efficiency
Standard efficiency (equivalent to IE1) : Single-phase, 3-phase 0.15kW or less Equivalent to IE3 efficiency : 0.25 – 0.4kW, Top Runner efficiency (equivalent to IE3) : 3-phase 0.75kW or more Starting method Direct-on-Line start Type Drip-proof protected type : Single-phase Totally-enclosed-fan-cooled outdoor type : 3-phase 0.15kW or more Power source Single phase 100V : 80 – 400W 3-phase 200V : 0.15 – 7.5kW Synchronous rotation speed 3000min-1 Flange spec Special flange or JIS 10K standard type Paint color 7.5BG5/1.5 *1 For more than 80°C, contact us.
*2 SLP2-25-e and SLP2-50-51.5-e are made of SUS304.
Single-phase BƠM LY TÂM TRỤC ĐỨNG SLP2
Nominal diameter mm Model Output W Specifications Allowable boost pressure MPa Discharge rate m3/min Total head m Discharge rate m3/min Total head m 25 SLP2-25-5.08S 80 0.02 6.8 0.07 2.8 0.20 SLP2-25-5.15S 150 0.02 9.1 0.07 4.8 0.20 SLP2-25-5.25S 250 0.02 13.5 0.07 9.5 0.20 32 SLP2-32-5.25S 250 0.04 9.8 0.15 5.9 0.54 SLP2-32-5.4S 400 0.04 14.4 0.15 10.8 0.49 40 SLP2-40-5.25S 250 0.07 7.9 0.2 4.5 0.58 SLP2-40-5.4S 400 0.07 11.7 0.25 6.3 0.53 50 SLP2-50-5.4S 400 0.12 9.1 0.32 4.6 0.56 3-phase
Nominal diameter mm Model Output W Specifications Allowable boost pressure MPa Discharge rate m3/min Total head m Discharge rate m3/min Total head m 25 SLP2-25-5.15 0.15 0.02 9.1 0.07 4.8 0.20 SLP2-25-5.25-e 0.25 0.02 13.5 0.07 9.5 0.20 32 SLP2-32-5.25-e 0.25 0.04 9.8 0.15 5.9 0.54 SLP2-32-5.4-e 0.4 0.04 14.4 0.15 10.8 0.49 40 SLP2-40-5.25-e 0.25 0.07 7.9 0.2 4.5 0.58 SLP2-40-5.4-e 0.4 0.07 11.7 0.25 6.3 0.53 SLP2-40-5.75-e 0.75 0.07 16.8 0.25 11.6 0.49 SLP2-40-51.5-e 1.5 0.04 28.6 0.23 22.6 0.69 SLP2-40-52.2-e 2.2 0.04 38.9 0.23 31.7 0.60 50 SLP2-50-5.4-e 0.4 0.12 9.1 0.32 4.6 0.56 SLP2-50-5.75-e 0.75 0.12 13.0 0.4 6.5 0.51 SLP2-50-51.5-e 1.5 0.12 20.4 0.4 14.2 0.46 SLP2-50-52.2-e 2.2 0.12 30.9 0.38 21.1 0.67 SLP2-50-53.7-e 3.7 0.12 41.9 0.4 30.3 0.56 65 SLP2-65-51.5-e 1.5 0.21 17.0 0.5 9.4 0.69 SLP2-65-52.2-e 2.2 0.21 23.6 0.63 12.6 0.69 SLP2-65-53.7-e 3.7 0.21 32.2 0.6 24.5 0.66 80 SLP2-80-51.5-e 1.5 0.4 12.5 0.9 3.7 0.69 SLP2-80-52.2-e 2.2 0.4 15.6 1.2 2.9 0.69 SLP2-80-53.7-e 3.7 0.4 21.7 1.2 7.1 0.69
