| PUMP | ||
|
Liquid Handled |
Type of liquid | Clean water |
| Working [°C]
temperature |
min. -5 max. +90 max. +110 (H, HS, HW, HSW version) max. +120 (E version) | |
| Maximum working pressure [MPa] | 1 | |
|
Construction |
Impeller |
Closed centrifugal type for 32, 40, 50 series Reinforced laser welding for 40-200/11, 50-200/15 Closed centrifugal three dimensional blades for 65 series |
| Shaft seal type | Mechanical seal | |
| Bearing | Sealed ball bearing | |
| Pipe Connection | Suction | Flange DN 50, 65 according to EN 1092-2
Flange DN 80 according to UNI 2236-67 (4 holes) |
| Discharge | Flange DN 32, 40, 50, 65 according to EN 1092-2 | |
|
Material |
Casing | Cast iron EN-GJL-250-EN 1561 |
| Impeller | AISI 304 (32, 40, 50 series)
AISI 316 made by precision casting (65 series) |
|
| Shaft seal | Ceramic/Carbon/NBR (see Optionals on pag. 307-310) | |
| Shaft | AISI 304 (wet extension) | |
| Bracket | Aluminium/Cast iron | |
| Accessory | Counterflange | DN 32, 40, 50, 65, 80 (see pag. 315) |
| Applicable standard of test | ISO 9906 – Annex A | |
| MOTOR | |||||
|
Type |
3D | 3DS | 3DP | ||
| Electric – TEFC | |||||
| Single Phase | Three Phase | ||||
| Efficiency (Reg. 640/2009) | – | IE2 from 1.1 kW to 22 kW IE3 from 7.5 kW to 22 kW | |||
| No. of Poles | 2 | ||||
| Rotation speed | [min-1] | ≈2900 | |||
| Insulation Class | F | F (temperature rise class B) | |||
| Protection degree | IP 55 | ||||
| Power rating | [kW] | 1.1 ÷ 2.2 | 1.1 ÷ 22 | ||
| [HP] | 1.5 ÷ 3 | 1.5 ÷ 30 | |||
| Frequency | [Hz] | 50 | |||
| Voltage | [V] | 230 ±10% | 230/400 ±10% (up to 4 kW) 400/690 ±10% (5.5 kW and above) | ||
| Capacitor | Built in | – | |||
| Over load protection | Provided by the user | ||||
| Casing material | Aluminium | ||||
| Motor support | Cast iron / Aluminium | ||||
| Dimensions of cable entry | M20x1.5 | PG 13.5 PG 16 PG 21 | M20x1.5, M25x1.5, M32x1.5, M40x1.5 | ||
|
Flange mount (IEC motor) |
/ |
IM B5 (up to 2.2 kW) IM B35 (3.0 kW and above) |
IM B3 |
||
3D SERIES 32 SIZE
|
Pump type |
kW | HP | l/min 0 | 100 | 150 | 200 | 250 | 300 | 333 | 360 | 400 | 450 |
| m³/h 0 | 6 | 9 | 12 | 15 | 18 | 20 | 21.6 | 24 | 27 | |||
| 32-125/1. 1(M) * | 1.1 | 1.5 | 23 | 22.4 | 21.2 | 19.3 | 17.1 | 14.4 | 12.5 | – | – | – |
| 32-160/1. 5(M) * | 1.5 | 2 | 28.5 | 27.5 | 25.9 | 23.7 | 21.3 | 18.5 | 16.4 | – | – | – |
| 32-160/2. 2(M) * | 2.2 | 3 | 36.7 | 35.4 | 34.1 | 32.2 | 29.8 | 27.3 | 25.5 | – | – | – |
| 32-200/3. 0 | 3 | 4 | 44 | 43 | 41 | 39 | 36 .5 | 33 | 31 | – | – | – |
| 32-200/4. 0 | 4 | 5.5 | 53 | 52 .5 | 51 | 49 | 46 | 43 | 41 | 39 | – | – |
| 32-200/7. 5 | 7.5 | 10 | 68 | 67 | 65 | 63 | 61 | 57 | 55 | 53 | 50 | 46 |
3D SERIES 40 SIZE
|
Pump type |
kW | HP | l/min 0 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 600 | 700 |
| m³/h 0 | 12 | 15 | 18 | 21 | 24 | 27 | 30 | 36 | 42 | |||
| 40-125/1. 5(M) * | 1.5 | 2 | 19 | 18.2 | 17.6 | 16.8 | 15.9 | 14.8 | 13.7 | 12.4 | 9.6 | 6.3 |
| 40-125/2. 2(M) * | 2.2 | 3 | 25 | 24.4 | 23.9 | 23.2 | 22.4 | 21.4 | 20.4 | 19.2 | 16.5 | 13.7 |
| 40-160/3. 0 | 3 | 4 | 31 | 29 .4 | 28.7 | 27.8 | 26.8 | 25.8 | 24.8 | 23.7 | 21.4 | 18.7 |
| 40-160/4. 0 | 4 | 5.5 | 38.8 | 37.2 | 36.5 | 35.7 | 34.8 | 33.8 | 32.8 | 31.8 | 29.5 | 27 |
| 40-200/5. 5 | 5.5 | 7.5 | 45.5 | 44.5 | 44 | 43 | 42 | 41 | 40 | 39 | 36.3 | 33 |
| 40-200/7. 5 | 7.5 | 10 | 55 | 53.5 | 53 | 52 | 51.5 | 50.5 | 49.5 | 48.5 | 46 | 43 |
| 40-200/11 | 11 | 15 | 71 | 70 | 69 | 68.5 | 67.5 | 67 | 66 | 65 | 63 | 60 |
3D SERIES 50 SIZE
|
Pump type |
kW | HP | l/min 0 | 400 | 500 | 600 | 700 | 800 | 900 | 1000 | 1100 | 1200 |
| m³/h 0 | 24 | 30 | 36 | 42 | 48 | 54 | 60 | 66 | 72 | |||
| 50-125/2. 2(M) * | 2.2 | 3 | 19.5 | 18 | 17 | 15.7 | 14.2 | 12.6 | 10.9 | 9 | – | – |
| 50-125/3. 0 | 3 | 4 | 22.5 | 21.5 | 20.8 | 19.8 | 18.5 | 17.1 | 15.5 | 13.8 | 12 | 10 |
| 50-125/4. 0 | 4 | 5.5 | 26.5 | 25.8 | 25.3 | 24.5 | 23.5 | 22.2 | 20.7 | 19 | 17.2 | 15.3 |
| 50-160/5. 5 | 5.5 | 7.5 | 33 | 32 | 31.5 | 30.5 | 29.3 | 27.9 | 26.2 | 24.4 | 22.4 | 20 |
| 50-160/7. 5 | 7.5 | 10 | 39.5 | 38.2 | 37.6 | 36.9 | 35.8 | 34.5 | 32.9 | 30.9 | 28.9 | 26.7 |
| 50-200/9. 2 | 9.2 | 12.5 | 51.5 | – | 49.5 | 48 | 46 .5 | 44.5 | 42.5 | 40 | 37.6 | 34.4 |
| 50-200/11 | 11 | 15 | 57.5 | – | 55.5 | 54.5 | 52.5 | 51 | 49 | 47 | 44.5 | 42 |
| 50-200/15 | 15 | 20 | 71 | – | 69.5 | 68.5 | 67 | 65.5 | 63.5 | 61.5 | 59 | 56 |
3D SERIES 65 SIZE
|
Pump type |
kW | HP | l/min 0 | 600 | 700 | 1000 | 1300 | 1600 | 1900 | 2100 | 2200 | 2300 |
| m³/h 0 | 36 | 42 | 60 | 78 | 96 | 114 | 126 | 132 | 138 | |||
| 65-125/4. 0 | 4 | 5.5 | 22 | 20 .4 | 19.8 | 17.2 | 14 | 10.4 | 6 | – | – | – |
| 65-125/5. 5 | 5.5 | 7.5 | 26 | – | 25 | 22.5 | 19.4 | 15.5 | 11 | 8 | – | – |
| 65-125/7. 5 | 7.5 | 10 | 31 | – | 29.6 | 27.5 | 24.7 | 21.5 | 17.8 | 14.7 | 13 | – |
| 65-160/7. 5 | 7.5 | 10 | 31.6 | – | 29 | 26.6 | 23.5 | 19.8 | 15.5 | 12.3 | – | – |
| 65-160/9. 2 | 9.2 | 12.5 | 36.5 | – | 34.7 | 32.4 | 29.6 | 26.3 | 22.2 | 18.8 | 17 | – |
| 65-160/11 | 11 | 15 | 40.5 | – | 39 | 37 | 34 | 31 | 27 | 23 | 22 | 20 |
| 65-160/15 | 15 | 20 | 48 | – | 46 | 44 | 41 .5 | 38.4 | 34.6 | 31.9 | 30.5 | 29 |
| 65-200/15 | 15 | 20 | 54 | – | 51 | 47 | 43 | 38.6 | 33.3 | 29.2 | 27 | – |
| 65-200/18.5 | 18.5 | 25 | 60 | – | 58 | 55 | 51 | 47 | 41.5 | 37.9 | 35.9 | 33.6 |
| 65-200/22 | 22 | 30 | 68 | – | 65.5 | 62.5 | 58.5 | 54.5 | 49.5 | 46 | 44.5 | 42.5 |
